Jump to content

Dave

Lost Member
  • Content count

    522
  • Donations

    $0.00 
  • Joined

  • Last visited

Community Reputation

0 Neutral

About Dave

  • Rank
    WILD TURKEY! [AQUAMAN]

Personal Information

  • Occupation:
    well driller
  1. Dave

    Need parts for front end on my '06

    I know this is an old thread but I just changed out my ball joints again I posted it up in this thread they had 24000 miles on them a lot of work for not many miles. people keep saying use carlys where do I find those for next time?
  2. my wife and I are going to try to make this one at least one day we rented a Honda Big Red. they named it that for a reason that thing was like riding an old big red three wheeler NO SUSPENSION we both went to the chiropractor after that and she never goes I felt like I had rode my raptor, drank, and wrecked all day and we could not keep up with muddy. we would like to try a commander I thing the viking and big red are same category, work, no lawsuits, and no fun. a maverick would be awesome to try out to but thats a toy to dream about not actually get. that thing is half of what I paid for my house
  3. Dave

    utv and quad demo day

    we were planning on going to it on friday in the evening but i was stuck on the job till late. we will not make it today either, having some friends coming over to work on the house.
  4. Dave

    utv and quad demo day

    they are in sand hollow actually off of pearl friday night and Saturday. we went down there after they didn't show and checked out the machines. they have a rental one also, 140.00 per day. if you only took it out a few times a year probably be less than depreciation on a new one. we are going to rent one next trip hopefully.
  5. Dave

    utv and quad demo day

    I told my wife the diesel club was having a another get together she kind of ho hummed it off until I told that birds of prey would likely be there demoing new machines. totally changed everything. if its at all possible with work we will be there for a day trip. I thought we would be ready to buy one by now, but paying for our baby girl comes first. it sure was fun last time and I really appreciate the last demo day, Cindy was sold on them . by the way Cindy is a scarier driver sober than muddy is with a load on
  6. Dave

    UTV demonstration sat nov 30

    My wife liked them better than i did she is trying to figure out we're we can cut this winter to get one in the spring many thanks to birds of prey for bringing those out
  7. Dave

    UTV demonstration sat nov 30

    Im planning on being there for the morning have stuff to do in the afternoon
  8. Dave

    no oil pressure

    It's finally running again again it ended up needing a new tipm, ECM, security module, and abs module, and they replaced the engine wiring harness. I'm just glad it's over and it runs, 9000.00 in dealer repairs, thankfully the insurance paid for Lot of it. Makes me nervous to do anything with electrical.
  9. Dave

    no oil pressure

    I have checked the voltages on the data connection it has 2.45 volts on 6 and 14 and 12 plus volts on number 16 everything else is at 0 besides 4 and 5 which are grounded. bbbadboy is coming out to use the dodge tool this evening I will report back what the findings are thanks for the help
  10. Dave

    no oil pressure

    ) I have checked the obd port as much as I know how, pin 16 has voltage, 4 and 5 are grounded, I havent been able to find a wiring schematic that I can figure out. does some one have the schematic to hook up an obd port directly to the ecm or a full schematic for an 06.
  11. Dave

    no oil pressure

    i hooked everything up and for shits and giggles cranked on it. it fired right up and the throttle works, the ecm is out of an auto truck though and I havent test drove it yet. still havent got the software installed dont know if its my smarty or the truck obd port that is causing the communication loss. think I will drive it and see what happens. any advice on how to break in a new engine? bbbadboy would that be something that would help figure out the wiring issues?
  12. Dave

    no oil pressure

    all right I went to the dealer and checked on a truck it is a ground. Im still not getting any comunication through the ecm cable I changed out the ecm with a reman and got a recovery file from smarty but with the new ecm I stil have no comunication the smarty comes on and gives a code 14. I have gone over every ground, put new batterys in it, checked the connections on the ecm cable disconnected a bunch of stuff tried it hooked it back up and tried it, and am at a loss on what to do next? I pulled the square ecm fuse thats in the box I think its number 42 I have power on both sides of that with the fuse out one side is 12.67 volts the other is 11.99 volts also there is a relay beside the fuse box and I cant find what that does. Im at a loss on what to do next besides pull it out of the shop and burn it. this is driving me up a wall
  13. Dave

    no oil pressure

    guys i dont think those pictures are very clear but in the second picture the wire coming out of the loom and heading accross the steering shaft is the one Im trying to figure out, positive or negative thanks for all the help so far.
  14. Dave

    no oil pressure

    I found this wire I had hooked to the positive Im not sure were it hooks up, Im thinking this is were I screwed up, everything that has plugs is self explanatory, so I didnt mark anything, I can usually remember for a month or so anything odd but its been 3. does this hook to the positive or negative? the injectors sit there firing when hooked to the negative and the key on and the air heater selanoid kicks on and the alternator gets hot when hooked to the positive. I got a code reader and all I get is a no hook up code.
  15. Dave

    no oil pressure

    thanks for the help on that. it still will not start or read the smarty is there a possiblity I fried the ECM?
×